Product Safety Notice

Product Safety Information Notice

A safety concern has been identified with certain circulating pumps manufactured by Tucson Pumps Limited for use in heating systems.

Product: GBP FLO circulating pumps
Manufacturer: Tucson Pumps Limited
Production Period: 2023 – 2024

Serious Risk
It has been identified that the mains electrical coupling supplied with these pumps can be connected in reverse which can pose a serious risk of electrocution.

How to Identify Affected Products
The affected products were manufactured between 2023 and November 2024 and can be identified by the product serial number (S/N) which is included on the label affixed to the pump.

Use the link below to the serial number checking tool at https://tucsonpumps.com/serial-number-checking-tool/ if you think your product is affected.

The serial numbers of affected circulating pumps are also set out in the table below:

Any Serial No. with Prefix Beginning
S/N D32 11233b or earlier (6m models)
S/N C*


Unaffected GBP FLO Circulating Pumps

GBP FLO circulating pumps manufactured after November 2024 include a redesigned mains electrical coupling which has removed the risk that the electrical coupling can be connected incorrectly. These products will have serial numbers commencing after D32 11233b. These products are not impacted by this programme.

Further Action if you have an Affected Pump

Consumers:

  • You may not realise that you have an affected pump, however, given the number of pumps affected, it is recommended that consumers should check.
  • An installed pump can remain in operation, but you must not make any physical contact with the pump electrical coupling. Consult Tucson Pumps immediately to schedule an appointment for replacement of the pump electrical connection by a Tucson engineer at your property.
  • Contact us at productsafety@tucsonpumps.ie or phone +353 (0)1 842 6255 / +44 800 044 3258.

Installers:

  • If you are aware that you have installed a GBP FLO circulating pump with a serial number listed above, contact us at productsafety@tucsonpumps.ie or phone +353 (0)1 842 6255 / +44 800 044 3258.

Merchants:

  • If you have stock of GBP FLO circulating pumps with the serial numbers identified above, stop sales immediately.
  • Please contact your Tucson area sales representative or email productsafety@tucsonpumps.ie.

 

Under this Product Replacement Programme, installed units of affected pumps should only be replaced by an approved, qualified Tucson service agent/installer, and only with a new circulating pump electrical connection.

Check Your Pump’s Serial Number